TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 675 of 772

TM 9-2350-260-20-1-2

ACCELERATOR TUBE ASSEMBLY REPLACEMENT (Sheet 1 of 4)

PROCEDURE INDEX

PROCEDURE

PAGE

Removal

7-406

Cleaning and Inspection

7-408

Installation

7-408

TOOLS:

1/2 in. combination box and open end wrench

Slip joint pliers

7/16 in. combination box and open end wrench

Mechanic's scribe

Torque wrench with 1/2 in. drive (0-175 lb-ft) (0-237 N

•

m)

1/2 in. crowfoot wrench with 1/2 in. drive

Hinged handle with 1/2 in. drive

SUPPLIES:

Cotter pin (MS24665-281) (2 required)

Rags (Item 65, Appendix D)

Dry cleaning solvent (Item 54, Appendix D)

Pencil and paper

Lockwasher (MS35338-44)

REMOVAL:

NOTE

Remove

fixed

fire

extinguisher

cylinder, if necessary to perform task

(page 21-50).

1.

Using pliers, remove cotter pin (A) from pin (B).

Throw cotter pin away.

2.

Remove pin (B) from clevis (C).

Go on to Sheet 2

TA148513

7-406