TM 9-2350-260-20-1-2
ACCELERATOR LEVER ASSEMBLY REPLACEMENT (Sheet 3 of 3)
4.
Using vise, press new bearing into lever (G).
5.
Install lever (G) on support (C).
6.
Using wrench, install washer bearing (H), washer
(J), and nut (K).
7.
Using pliers, install new cotter pin (L).
8.
Install pin (M) in clevis (N) on lever (G).
9.
Using pliers, install new cotter pin (P) in pin (M).
10.
Install pin (Q)in clevis (R) on lever (G).
11.
Using pliers, install new cotter pin (S) in pin (Q).
12.
Using socket and torque wrench, tighten two screws (D) to 15-17 lb-ft (0-23 N
•
m).
Operate accelerator foot pedal
to make sure linkage operates smoothly.
If linkage does not operate smoothly, install any missing parts and
remove things in the way.
End of Task
TA148508
7-401