TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 678 of 772

TM 9-2350-260-20-1-2

ACCELERATOR TUBE ASSEMBLY REPLACEMENT (Sheet 4 of 4)

6.

Push tube (D) through hole in bracket (J).

7.

Install pin (K) in clevis (L) and lever (M) while pushing tube (D) toward front of tank.

8.

Using pliers, install new cotter pin (N) in pin (K).

9.

Screw jamnut (P) al the way on tube (D).

10.

Screw clevis (Q on tube (D) the recorded number of turns.

11.

Using torque wrench and crowfoot wrench, tighten jamnut (P) against clevis (Q) to 13-15 lb-ft (18-20 N

•

m) while

holding clevis (Q) with pliers.

12.

Install pin R) in clevis (Q) and lever (S).

13.

Using pliers, install new cotter pin (T) on pin (R).

14.

Press accelerator foot pedal and make sure linkage operates smoothly.

If linkage does not operate smoothly,

replace any missing parts and remove things in the way.

15.

Adjust pedal return spring (page 7-385).

16.

Install fixed fire extinguisher cylinder, if cylinder was removed (page 21-51).

End of Task

TA148516

7-409