TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 686 of 772

TM 9-2350-260-20-1-2

BULKHEAD PLATE ASSEMBLY REPLACEMENT (Sheet 2 of 6)

2.

Using pliers, remove cotter pin (C) and pin (D).

Throw cotter pin away.

3.

Separate rod (E) from clevis (F).

4.

Using 3/4 inch wrench, loosen nut (G).

5.

Make position of clevis (F) on brake rod (H).

6.

Remove clevis F) and nut (G) from brake rod (H).

7.

Using screwdriver, loosen damp (J) on boot and

bushing OK).

8.

Slide damp (J) off boot and bushing (K) and

tachometer cable (A).

9.

Using screwdriver, pry boot and bushing (K) out of

plate assembly (L) and slide forward on

tachometer cable (A).

10.

Remove boot and bushing (K).

11.

Inspect bushing.

If damaged, replace.

Go on to Sheet 3

TA148523

7-417