TM 9-2350-260-20-1-2
ACCELERATOR FLANGE ASSEMBLY REPLACEMENT (Sheet 2 of 4)
REMOVAL:
1.
Using pliers, remove cotter pin (A) from pin (B).
2.
Throw cotter pin away.
3.
Using fingers, remove pin 0) from clevis (C) and
rod end (D).
4.
Using hand, separate clevis (C) from rod end (D).
5.
Using 1/2 inch wrench, loosen nut (E) on rod assembly (F).
6.
Using 7/16 inch wrench, remove rod end (D).
Go on to Sheet 3
TA148517
7-411