TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 688 of 772

TM 9-2350-260-20-1-2

BULKHEAD PLATE ASSEMBLY REPLACEMENT (Sheet 4 of 6)

DISASSEMBLY:

1.

Using screwdriver, pry out seal (A).

Throw seal

away.

2

Using hammer and 1-1/8 inch drive punch, remove

bushing (B) Throw bushing away.

3.

Using 3/8 inch wrench, remove lubrication fitting

(C).

ASSEMBLY:

1.

Using hammer and 1-1/8 inch drive punch, install

bushing (A) into plate sleeve.

Center bushing (A)

in sleeve.

NOTE

Install seals (B) with sealing lips

facing same direction.

2.

Position seal (B) in sleeve.

Using hammer, lightly

tap seal into sleeve until seal is flush with sleeve.

3.

Install lubrication fitting (C) in sleeve.

Using 3/8

inch wrench, tighten and position lubrication fitting

to face toward center of plate.

Go on to Sheet 5

TA148525

7-419