TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 696 of 772

TM 9-2350-260-20-1-2

EXHAUST PIPE (LEFT SIDE) REPLACEMENT (Sheet 2 of 4)

REMOVAL:

1.

Using flat-tip screwdriver, loosen screw (A) holding

clamp (B) onto tube (C).

2.

sing socket, remove six self-locking nub (D) holding exhaust pipe (E) to turbosuperchager hosing (F).

Throw self-

locking nuts (D) away.

3.

Sliding exhaust pipe extension (G) out of tube (C), remove exhaust pipe (E) with insulation halves (H) and gasket

(J) from turbosupercharger housing (F).

Throw gasket (J) away.

Using cross-tip screwdriver and wrench, remove

14 screws (K), each with two flat washers (L), one

lockwasher (M), and one nut (N) holding insulation

halves (H) to exhaust pipe (E).

Throw

lockwashers (M) away.

5.

Using flat-tip screwdriver, remove clamp (P) from

packing (Q).

Remove packing (Q) from pipe (E).

6.

Remove insulation halves (H) from exhaust pipe (E).

Go on to Sheet 3

TA146422

8-6