TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 700 of 772

TM 9.2350-260-20-1-2

EXHAUST PIPE (RIGHT SIDE) REPLACEMENT (Sheet 2 of 4)

REMOVAL:

1.

Using adjustable wrench to hold elbow (A), use

7/8 inch wrench and loosen fitting (B).

2.

Using hammer, tap elbow (A) and lift tube (C) from

exhaust pipe.

3.

Using socket and open end wrench, remove six

self-locking nuts (D) holding exhaust pipe (E) to

turbosupercharger housing (F).

Remove exhaust

pipe (E) with insulation halve (G) and gasket (H)

from turbosupercharger housing (F).

Throw

gasket (H) and self-locking nut (D) away.

4.

Using cross-tip screwdriver and 5/16 inch wrench,

remove 14 screws (J), each with two flat washes

(K, one lockwasher (L), and one nut (M) holding

insulation halves (G) to exhaust pipe (E).

Throw

lockwashers (L) away.

5.

Using fiat-tip screwdriver, remove clamp (N) from

pacing (P).

Remove packing (P) from pipe (E).

6.

Remove insulation halves (G) from exhaust pipe

(E).

Go on to Sheet 3

TA146426

8-10