TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 708 of 772

TM 9-2350-260-20-1-2

ENGINE SHROUD REPAIR ON THE ENGINE (Sheet 1 of 5)

PROCEDURE INDEX

PROCEDURE

PAGE

Disassembly

9-6

Assembly

9-8

TOOLS:

Ratchet with 1/2 in. drive

7/16 in. socket with 1/2 in. drive

9/16 in. socket with 1/2 in. drive

3 in. extension with 1/2 in. drive

Putty knife

Cross-tip screwdriver (Phillips)

SUPPLIES:

Adhesive (Item 4, Appendix D)

Dry cleaning solvent (Item 54, Appendix D)

Rags (Item 65, Appendix D)

Lockwasher (MS35338-46) (29 required)

Gasket (8762922) (2 required)

PRELIMINARY PROCEDURES:

Remove top deck assembly (page 16-20)

Remove transmission shroud (page 9-20)

DISASSEMBLY:

1.

Using 7/16 inch socket, remove seven screws, washers, and lockwashers (A) holding three seal (B) retainers (C) to

engine shroud right and left sides.

Throw lockwashers away.

2.

Remove retainers (C) from shroud.

Go on to Sheet 2

TA146853

9-6