TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 706 of 772

TM 9-2350-260-20-1-2

ENGINE SHROUD SUPPORT REPLACEMENT (Sheet 1 of 2)

TOOLS:

Putty knife

9/16 in. combination box and open end wrench

SUPPLIES:

Adhesive (Item 1, Appendix D)

Insulation (8762981)

Insulation (10863503)

Lockwasher (MS35338-46) (8 required)

Dry cleaning solvent (Item 54, Appendix D)

Rags (Item 65, Appendix D)

PRELIMINARY PROCEDURES:

Remove top deck (page 16-20)

Remove transmission shroud (page 9-20)

Remove engine shroud (page 9-2)

REMOVAL:

1.

Using wrench, remove four screws, washers, and lockwashers (A) holding front shroud support assembly (B) to

engine (C).

Throw lockwashers away.

2.

Remove shroud support.

3.

Using wrench, remove four screws, washers, and

lockwashers (D) holding rear shroud support

assembly (E) to engine (C).

Throw lockwashers

away.

4.

Remove shroud support.

Go on to Sheet 2

TA146851

9-4