TM 9-2350-260-20-1-2
ENGINE SHROUD REPAIR ON THE ENGINE (Sheet 5 of 5)
11.
Install seals (Q) and three retainers (R) to shroud
both side, using seven screws, washers, and new
lockwashers (S).
12.
Using 7/16 inch socket, tighten seven screws (S).
13.
Install retainer (T) to seal (Q) and shroud, using
two screws and new lockwashers (U) (hidden)
under seals on both sides.
14.
Using screwdriver, tighten two screws (U) on each
side.
15.
Install transmission shroud (page 9-23).
16.
Install top deck assembly (page 16-22).
End of Task
TA146857
9-10