TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 710 of 772

TM 9-2350-260-20-1-2

ENGINE SHROUD REPAIR ON THE ENGINE (Sheet 3 of 5)

12.

Using screwdriver,

remove six screws and

lockwashers (N from retainer (P).

Throw

lockwashers away.

13.

Remove retainer (P) from shroud.

14.

Remove seal (Q) from shroud.

15.

Using 9/16 inch socket, remove six screws, washers, and lockwashers (R) holding access plate (S) to right and left

sides of shroud.

Throw lockwashers away.

16.

Remove access plate (S) with gasket from shroud.

17.

Using putty knife, remove gasket from access

plate (S).

Throw gasket away.

18.

Using dry cleaning solvent (Item 54, Appendix D)

and rags (Item 65, Appendix D), clean areas

where gasket was removed.

ASSEMBLY:

1.

Using putty knife, apply adhesive (Item 4,

Appendix D) to back side of access plates (A).

2.

Install new gaskets (B) to access plates (A).

Go on to Sheet 4

TA146855

9-8