TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 713 of 772

TM 9-2350-260-20-1-2

ENGINE SHROUD REPAIR OFF ENGINE (Sheet 1 of 2)

TOOLS:

Putty knife

Ratchet with 1/2 in. drive

7/16 in. socket with 1/2 in. drive

SUPPLIES:

Dry cleaning solvent (Item 54, Appendix D)

Rags (Item 65, Appendix D)

Adhesive (Item 4, Appendix D)

Insulation (10863512)

Insulation (8762924)

Lockwasher (MS35338-46) (12 required)

PRELIMINARY PROCEDURE:

Remove engine shroud (page 9-2)

DISASSEMBLY:

1.

Using socket, remove six screws (A), lockwashers

(B), and flat washers (C) securing retainer (D) to

engine shroud (E) both ides.

Throw lockwashers

(B) away.

2.

Using socket, remove six screws (F), lockwashers

(G), and fiat washers (H) securing retainer (J) to

engine shroud (E) both sides.

Throw lockwashers

(G) away.

3.

Remove retainers (D) and (J).

4.

Using putty knife, remove insulation (K) and (L)

from both sides of engine shroud (E).

Throw

insulation away.

5.

Using dry cleaning solvent (Item 54, Appendix D)

and rags (Item 65, Appendix D), clean areas

where insulation (K) and (L) were removed.

Go on to Sheet 2

TA146858

9-11