TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 709 of 772

TM 9-2350-260-20-1-2

ENGINE SHROUD REPAIR ON THE ENGINE (Sheet 2 of 5)

3.

Using screwdriver, remove two screws and lockwashers (D) hidden under seal, holding retainers (E) to engine

shroud right and left sides.

Throw lockwashers away.

4.

Remove retainers (E) from shroud.

5.

Displace seals (B) from shroud right and left sides.

6.

Using 7/16 inch socket, remove six screws, washers, and lockwashers (F) holding two elbow retainers G) to engine

shroud.

Throw lockwashers away.

7.

Remove retainers (G) from engine shroud.

8.

Remove seals (H) and elbows (J) from engine

shroud.

9.

Using screwdriver, lift front seal (K) and remove

two screws and lockwashers (hidden) (L) holding

retainer (M).

Throw lockwashers away.

10.

Remove retainer (M) from shroud.

11.

Remove seal (K) from shroud.

Go on to Sheet 3

TA146854

9-7