TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 716 of 772

TM 9-2350-260-20-1-2

TURBOCHARGER SHROUDS REPLACEMENT (Sheet 2 of 6)

Inner Shroud Replacement

NOTE

Procedures for replacement of the

left or right turbocharger shrouds are

similar.

Procedures for the left side

are shown.

REMOVAL:

1.

Using 11/16 inch wrench, disconnect hose

assembly (A) from turbocharger elbow (B).

2.

Using 1/2 inch socket, remove two screws and

washers (C) securing inner shroud (D) to

turbocharger plate.

3.

Using 1/2 inch socket, remove two screws and

washers (E) securing inner shroud (D) to

turbocharger plate.

4.

Using 1/2 inch wrench and 1/2 inch socket,

remove screw and self-locking nut (F) securing

inner shroud (D) to upper shroud (G).

Throw self-

locking nut away.

5.

Using 1/2 inch socket, remove three screws and

washers (H) securing inner shroud (D) to oil cooler

frame.

6.

Remove hose assembly (A) and grommet (J) from

inner shroud (D).

7.

Remove inner shroud (D).

8.

Remove grommet (J) from hose assembly (A).

Throw grommet away.

Go on to Sheet 3

TA146861

9-14