TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 717 of 772

TM 9-2350-260-20-1-2

TURBOCHARGER SHROUDS REPLACEMENT (Sheet 3 of 6)

Inner Shroud Replacement

INSTALLATION:

1.

Place inner shroud (A) into position.

2.

Install new grommet (B) on hose assembly (C).

3.

Install grommet (B) and hose assembly (C) in inner shroud (A).

4.

Install three screws and washers (D) securing inner shroud (A) to oil cooler frame.

5.

Install screw and new self-locking nut (E) to secure inner shroud (A) to upper shroud (F).

6.

Install four screws and washers (G) securing inner shroud (A) to turbocharger plate.

7.

Using 1/2 inch socket, tighten four screws (G).

8.

Using 1/2 inch socket with extension, tighten three screws (D).

9.

Using 1/2 inch socket and 1/2 inch wrench, tighten screw and nut (E).

10.

Connect hose assembly (C) to elbow (H).

Using 11/16 inch wrench, tighten hose assembly (C) onto elbow (H).

Go on to Sheet 4

TA146862

9-15