TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 694 of 772

TM 9-2350-260-20-1-2

EXHAUST PIPE CAP ASSEMBLY REPLACEMENT (Sheet 3 of 3)

INSTALLATION:

1.

Position tube cover (A) onto top of tube (B) with

mounting holes of tube cover (A) alined with

mounting holes in tube (B).

2.

Insert two spacers (C) into holes in top of tube

cover (A).

3.

Insert bolt (D) trough spacer (C), tube cover (A),

tub.

(B), tube cover (A), and spacer (C).

4.

Start new self-locking nut (E) onto bolt (D).

5.

Using two wrenches, tighten nut (E) to bolt (D).

6.

Position ca assembly onto exhaust pipe (F) at

same inward angle as exhaust pipe.

7.

Position clamp (G) onto bottom of cap assembly

and exhaust pipe (F).

Latch damp together with

bolt (H).

8.

Using wrench, tighten nut (J) on clamp (G) to hold

cap assembly to exhaust pipe (F).

9.

Close engine exhaust doors (TM 9-2350-260-10).

End of Task

TA146420

8-4