TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 689 of 772

TM 9-2350-260-20-14

BULKHEAD PLATE ASSEMBLY REPLACEMENT (Sheet 5 of 6)

INSTALLATION:

1.

Slide new gasket (A) and plate assembly (B) over

tachometer cable (C), brake rod (D), and

accelerator rod (E).

2.

Position gasket (A) and plate assembly (B) on

bulkhead (F).

3.

Using 9/16 inch socket, install six screws and new

lockwashers (G) to secure plate assembly (B) to

bulkhead (F).

4.

Install boot (H), bushing (J), and clamp (K) onto

tachometer cable (C).

5.

Slide boot (H) back on tachometer cable (C) until it

contacts bulkhead (F).

6.

Apply a coat of adhesive (Item 4, Appendix D) to

outer surface of boot (H).

7.

Position boot (H) into plate assembly (B).

8.

Hold tachometer cable (C) and slide bushing (J) back and into boot (H).

9.

Position clamp (K) over boot (H) and into groove.

Using flat-tip screwdriver, secure clamp (K).

Go on to Sheet 6

TA148526

7-420