TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 660 of 772

TM 9-2350-260-20-1-2

ACCELERATOR PEDAL REPLACEMENT (Sheet 1 of 4)

TOOLS:

9/16 in. combination box and open end wrench (2 required)

7/16 in. combination box and open end wrench

Slip joint pliers

1/8 in. drive pin punch

SUPPLIES:

Paper tags

Pencil

Cotter pi (MS24665-281)

Bearings (7765216) 2 required)

Lockwasher (MS35338-46) (6 required)

PRELIMINARY PROCEDURE:

Remove accelerator foot pedal

lock assembly (page 7-388)

REMOVAL:

NOTE

Tag shims which may be located under housings (L) and (M) for installation.

1.

Using 7/16 inch wrench, remove screw and lockwasher (A) securing detent plate (B).

Throw lockwasher away.

2.

Remove detent plate (B) from shaft (C).

3.

Using 9/16 inch wrench, remove six screws and lockwashers ().

Throw lockwasher away.

4.

Remove bracket (E).

5.

Remove cover (F).

6.

Using pliers, remove cotter pin (G) from pin (H).

Throw cotter pin away.

7.

Remove pin (H) from lever (J) and clevis (K).

8.

Remove pedal (P), control rod (C), and attached parts from tank as a unit.

Go on to Sheet 2

TA148466

7-391