TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 663 of 772

TM 9-2350-260-20-1-2

ACCELERATOR PEDAL REPLACEMENT (Sheet 4 of 4)

8.

Install pin (J) through lever (K) and clevis (L).

9.

Using pliers, install new cotter pin (M) through pin (J).

10.

Position cover (N) over rod (D).

NOTE

If shims were removed, they must be installed at this time.

11.

Position bracket (P) on cover (N).

12.

Using 9/16 inch wrench, install two screws and new lockwashers (Q) through bracket (P), cover (N), and housing

(R).

13.

Using 9/16 inch wrench, install two screws and new lockwashers (Q) through cover (N) and housing (R) (hidden).

14.

Using 9/16 inch wrench, install two screws and new lockwashers (Q) through housing (G).

15.

Install detent plate (S) onto control rod (D) and woodruff key (H).

16.

Adjust accelerator pedal (page 7-387).

17.

Using 7/16 inch wrench, install new lockwasher and screw (T) to secure detent plate (S) to control rod (D).

18.

Install accelerator foot pedal lock assembly (page 7-389).

End of Task

TA148469

7-394