TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 128 of 783

TM 9-2350-260-20-1-3

MASTER CONTROL PANEL REPAIR (Sheet 54 of 71)

Master Control Panel Power Wiring Harness Replacement (Sheet 1 of 6)

PROCEDURE INDEX

PROCEDURE

PAGE

Removal

10-116

Installation

10-120

TOOLS:

Flat-tip screwdriver

3/8 in.

combination box and open end wrench (2 required)

11/32 in.

combination box and open end wrench

Offset flat-tip screwdriver

Cross-tip screwdriver

SUPPLIES:

Silicone compound (Item 32, Appendix D)

Lockwasher (MS35338-42)(5 required)

PRELIMINARY PROCEDURE: Remove panel from tank (page 10-54)

REMOVAL:

1.

Using screwdriver on screw (A) and 11/32 inch wrench on nut

(C), remove four screws (A), lockwashers (B), and nut (C)

securing connector (D) to panel.

Throw lockwashers away.

2.

Remove connector (D) from panel and position aside.

Go on to Sheet 2

TA147148

10-116