TM-9-2350-260-20-1-3
TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15
TM-9-2350-260-20-1-3 - Page 57 of 783
TM 9-2350-260-20-1-3
GENERATOR SWITCH BRACKET REPLACEMENT (Sheet 1 of 1)
TOOLS:
7/16 in.
combination box and open end wrench
SUPPLIES:
Lockwasher (MS35338-43) (2 required)
PRELIMINARY PROCEDURE:
Remove generator switch (page 10-43)
NOTE
Generator switch is only on tanks
which are equipped for deep water
fording.
REMOVAL:
1.
Using socket, remove two screws (A) and
lockwashers (B).
Throw lockwashers away.
2.
Remove switch bracket (C).
INSTALLATION:
1.
Place switch bracket (C) in position.
2.
Using socket, install two screws (A) and new
lockwashers (B).
3.
Install generator switch (page 10-44).
End of Task
TA147077
10-45
Back to Top
