TM-9-2350-260-20-1-3
TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15
TM-9-2350-260-20-1-3 - Page 48 of 783
TM 9-2350-260-20-1-3
STARTER LOW VOLTAGE RELAY SOLENOID REPLACEMENT (2D ENGINE) (Sheet 1 of 2)
TOOLS: Ratchet with 1/2 in.
drive
5 in.
extension with 1/2 in.
drive
7/16 in.
socket with 1/2 in.
drive
7/16 in.
combination box and open
end wrench
Spanner wrench
SPECIAL TOOLS: Ground hop kit (Item 30
Chapter 3, Section I)
SUPPLIES:
Self-locking nut (MS21045-4) (2 required)
REFERENCE:
TM 9-2350-260-10
PRELIMINARY PROCEDURE:
Remove powerplant
(page 5-27)
REMOVAL:
1.
Using spanner wrench, unscrew electrical plug (A)
from front of relay solenoid (B).
2.
Using socket and 7/16 inch wrench, remove two
capsrews C), insulators (D), and self-locking nut (E)
securing relay solenoid (B) to mounting bracket (F).
Remove relay solenoid.
Throw self-locking nut
away.
INSPECTION:
Inspect insulator (D) and wiring harness (G) with
connector plug (A) for cracks or damage.
Replace if
damaged.
Go on to Sheet 2
10-36
Back to Top
