TM-9-2350-260-20-1-3
TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15
TM-9-2350-260-20-1-3 - Page 43 of 783
TM 9-2350-260-20-1-3
STARTER REPLACEMENT (Sheet 3 of 7)
6.
Using 1/2 inch wrench, loosen two self-locking nuts
(P) securing U-bolt (Q) to cradle assembly (R).
Throw self-locking nuts away.
7.
Using 1/2 inch wrench, move four screws (S) and
lockwashers securing relay solenoid bracket to
engine oil pan.
Throw lockwashers away.
8.
Using pliers, cut and remove lockwire (U) on four
screws (V) securing starter cradle assembly (W) and
bracket (X) to engine oil pan.
9.
Using 9/16 inch socket and extension, loosen and
remove four screws and flat washers (V) securing
starter cradle assembly (W) and bracket (X) to
engine oil pan.
Remove starter cradle bracket and
U-bolt as an assembly.
Go on to Sheet 4
TA147063
10-31
Back to Top
