TM-9-2350-260-20-1-3
TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15
TM-9-2350-260-20-1-3 - Page 35 of 783
TM 9-2350-260-20-1-3
VOLTAGE REGULATOR ASSEMBLY REPLACEMENT (Sheet 2 of 3)
3.
Using spanner wrench, remove connectors (C) and
(D) from voltage regulator (B).
4.
Using 5/16 inch wrench, remove screw (E), star
washer (F), ground lead (G), and star washer (H)
from voltage regulator (B).
NOTE
Screws (J) and (K) are part of voltage
regulator (B) and can not be
removed.
Completely loosen screws
(J) and (K) when doing steps 5 and 6.
5.
Using 3/8 inch socket and extension, completely loosen
three screws (J).
6.
Using 3/8 inch wrench, completely loosen screw (K).
7.
Using hands, remove voltage regulator (B) from bracket (L).
8.
Using 7/16 inch wrench, remove four screws and
lockwashers (M) and three clamps (N).
Throw
lockwashers away.
9.
Using hands, remove bracket (L).
10. Using 7/16 inch wrench, remove screw (P),
lockwasher (Q), and ground lead (G) from terminal
(R) on hull.
Throw lockwasher
Go on to Sheet 3
TA147055
10-23
Back to Top
