TM-9-2350-260-20-1-3
TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15
TM-9-2350-260-20-1-3 - Page 51 of 783
TM 9-2350-260-20-1-3
ENGINE FUEL INJECTION PUMP-FUEL SHUTOFF LEAD REPLACEMENT (Sheet 2 of 5)
REMOVAL:
1.
Using 7/8 inch wrench, loosen retaining nut (A) on electrical connector (B).
2.
Remove connector (B).
3.
Using Phillips screwdriver and 1/4 inch wrench,
remove four screws (C), lockwashers, and nut (D)
on connector (E).
Throw lockwashers away.
4.
Remove connector (E) from engine shroud (F).
5.
Using flat-tip screwdriver and 3/8 inch wrench,
remove three loop clamps (G).
Throw self-locking
nuts away.
Go on to Sheet 3
TA147071
10-39
Back to Top
