TM-9-2350-260-20-1-3
TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15
TM-9-2350-260-20-1-3 - Page 56 of 783
TM 9-2350-260-20-1-3
GENERATOR SWITCH OR GUARD REPLACEMENT (Sheet 2 of 2)
INSTALLATION:
NOTE
Use multimeter to verify continuity that switch (A) is in ON position.
1.
Position switch (A) with ON position up through rear of mounting bracket (B).
2.
Position guard (C) over switch (A) toggle and front of mounting bracket (B).
3.
Using cross-tip screwdriver, install and tighten two screws and new lockwashers (D) securing guard (C) and switch
(A) to mounting bracket (B).
4.
Coat outside surface of lead (E) and (F) connectors with silicone compound (Item 32, Appendix D) and connect to
switch (A).
5.
Start engine (TM 9-2350-260-10) and check operation of generator.
6.
Shut down engine.
End of Task
TA147076
10-44
Back to Top
