TM 9-2350-260-20-1-3
STEERING CONTROL BRACKET REPLACEMENT (Sheet 2 of 2)
2.
Using socket, remove two nut (C) and lockwashers (D) holding bracket (E) to transmission.
Throw lockwashers away.
3.
Remove bracket (E) from transmission.
INSTALLATION:
1.
Using socket, install bracket (A) to transmission with two nuts (B) and new lockwashers (C).
2.
Using wrench, install screw (D) and new lockwasher (E) to transmission.
3.
Install transmission shaft linkages (pages 15-35, 15-42).
4.
Install transmission shroud (page 9-23).
End of Task
TA146465
15-37