TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 771 of 783

TM 9-2350-260-20-1-3

STEERING CONTROL TO TRANSMISSION SHAFT CONNECTING LINK REPLACEMENT

(Sheet 1 of 2)

TOOLS:

Torque wrench with 1/2 in. drive (0-175 lb-ft)(0-237 N

•

m)

Slip joint pliers

9/16 in. socket with 1/2 in.

drive

9/16 in. combination box and open end wrench

Ratchet with 1/2 in. drive

SUPPLIES:

Cotter pin (MS24665-283)

Self-locking nut (MS21045-6)

PRELIMINARY PROCEDURES:Remove transmission

shroud (page 9-20)

Remove top deck

(page 16-20)

REMOVAL:

1.

Using socket and wrench on screw (A) and nut (B), remove self-locking nut and screw.

Throw self-locking nut away.

2.

Using wrench on bolt (C), remove bolt.

3.

Using pliers, remove cotter pin (D).

Throw cotter pin away.

4.

Using wrench on nut (E), remove nut (E) and washer (F).

5.

Remove link (G) from transmission stud (H).

Go on to Sheet 2

TA146466

15-38