TM-9-2350-260-20-1-3
TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15
TM-9-2350-260-20-1-3 - Page 95 of 783
TM 9-2350-260-20-1-3
MASTER CONTROL PANEL REPAIR (Sheet 21 of 71)
Master Heater Switch Hi-Lo Switch, and Indicator Light Replacement (Sheet 5 of 6)
6.
Using flat-tip screwdriver, remove screws and
washers from terminals 2 through 6 of replacement
switch (J).
Retain screws and washers for
installation.
7.
Position electrical leads (K) to switch (J) as shown.
NOTE
Electrical leads (405 and 407) are part of lamp assembly.
8.
Using flat-tip screwdriver, secure leads to terminals
2 through 6 with screws and washers removed in
step 6.
9.
Place switch (J) and lockring (M) in position on
panel.
10. Using 9/16 inch wrench, install new lockwasher (N)
and nut (P) securing switch ) to panel.
TA147115
Go on to Sheet 6
10-83
Back to Top
