TM 9-2350-260-20-1-3
MASTER CONTROL PANEL REPAIR (Sheet 16 of 71)
Utility Outlet Replacement (Sheet 2 of 2)
INSTALLATION:
1.
Apply silicone compound (Item 32, Appendix D) to
electrical connector (A).
2.
Connect electrical connector (A) of utility outlet
assembly (B) to breaker (C).
3.
Place utility outlet assembly (B) in position on panel.
4.
Using screwdriver, install two screws (D), new
lockwashers (E), and retainer chain (F) securing
utility outlet assembly (B) to panel.
5.
Using fingers, install cap (G) by turning clockwise.
6.
Install panel in tank (page 10-56).
End of Task
10-78