TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 117 of 1008

TM 9-2350-261-20-2

REPLACE NATO AUXILIARY POWER (SLAVE) RECEPTACLE (M577A2

AND M1068 ONLY) — Continued

0220 00

INSTALLATION

1.

Install insulator bushing (25) in adapter (13).

2.

Install receptacle (12), new gasket (22), insulator (23), adapter (13), and new gasket (24).

3.

Connect circuit 6 lead (16) to positive terminal of receptacle (12) with new lockwasher (15) and screw (14).

4.

Connect circuit 50 lead (8) to negative terminal of receptacle (12) with new lockwasher (18) and screw (17).

5.

Position new gasket (24) and adapter (13) on hull and secure with four screws (19), new lockwashers (20), and washers

(21).

6.

Align receptacle (12), new gasket (22), and insulator (23) with adapter (13). Install four screws (9), new lockwashers

(10), and washers (11).

7.

Place circuit 50 lead (8) and clamp (7) on hull weldnut. Secure with washer (6) and screw (5).

8.

Position harness protector (4) and secure with seven screws (1), new lockwashers (2), and washers (3).

FOLLOW-THROUGH STEPS

1.

Connect battery ground lead (WP 0294 00).

2.

Check receptacle for electrical continuity. Use multimeter.

END OFTASK

0220 00-3/4 blank