TM 9-2350-261-20-2
REPLACE INSTRUMENT PANEL ON-OFF SWITCHES — Continued
0241 00
NOTE
Make sure circuit leads are connected to correct switches. See applicable wiring diagram at
the end of this manual.
2.
Connect circuit leads (4) to rear of toggle switch (1).
FOLLOW-THROUGH STEPS
1.
Connect battery ground lead (WP 0294 00).
2.
Turn MASTER SWITCH to ON (see your -10).
3.
Check for proper operation of switch.
4.
Turn MASTER SWITCH to OFF (see your -10).
END OF TASK
0241 00-3/4 blank