TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 218 of 1008

TM 9-2350-261-20-2

REPLACE ENGINE START SWITCH — Continued

0243 00

INSTALLATION

1.

Connect circuit 14/74 connector (5) to rear of start switch (2).

2.

Install nut (4) and new lockwasher (3) on start switch (2).

3.

Install start switch (2) through rear of instrument panel. Secure with two nuts (1) and (4).

FOLLOW-THROUGH STEPS

1.

Install instrument panel (WP 0238 00).

2.

Connect battery ground lead (WP 0294 00).

3.

Turn MASTER SWITCH to ON (see your -10).

4.

Crank engine to check for proper installation of starter switch (see your -10).

5.

Turn MASTER SWITCH to OFF (see your -10).

END OF TASK

0243 00-2