TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 224 of 1008

REPLACE TACHOMETER CABLE AND ADAPTER — Continued

3.

Disconnect tachometer cable (8) from right angle adapter (9) and tachometer (15). Remove cable (8) with clamps and

grommet (10) attached from carrier.

4.

Remove grommet (10) and gasket (11) from cable (8). Discard grommet and gasket.

5.

Pull flexible drive shaft (13) part way out of adapter end of cable (8). Remove slotted washer (14) and flat washer (12)

from drive shaft. Remove drive shaft (13) from cable.

6.

Loosen nut and remove right angle adapter (9) from engine adapter.

7.

Check adapter. Replace adapter that has stripped threads.

0246 00-2

0246 00

TM 9-2350-261-20-2