TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 220 of 1008

TM 9-2350-261-20-2

REPLACE INSTRUMENT PANEL GAUGES — Continued

0244 00

INSTALLATION

1.

Install gauge (2) in front of instrument panel.

NOTE

Check front of instrument panel to make sure gauge is aligned correctly before tightening nuts.

2.

Install bracket (5) on rear of gauge, and secure with two new lockwashers (4) and nuts (3).

CAUTION

Make sure circuit leads are connected to correct gauges. See wiring diagrams at the end of

this manual.

3.

Connect circuit leads (1) to rear of gauge (2).

FOLLOW-THROUGH STEPS

1.

Install instrument panel (WP 0238 00).

2.

Connect battery ground lead (WP 0294 00).

3.

Turn MASTER SWITCH to ON (see your -10).

4.

Check fuel gauge and battery generator gauge for proper operation (see your -10).

5.

Start engine to check operation of coolant temperature gauge (see your -10).

6.

Stop/shutdown engine(see your -10).

END OF TASK

0244 00-2