TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 219 of 1008

TM 9-2350-261-20-2

REPLACE INSTRUMENT PANEL GAUGES

0244 00

THIS WORK PACKAGE COVERS:

Removal (page 0244 00-1).

Installation (page 0244 00-2).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0780 00, Item 29)

Materials/Parts

Lockwasher (2)

Personnel Required

Unit Mechanic

Equipment Condition

Engine stopped/shutdown (see your -10)

Carrier blocked (see your -10)

Battery ground lead disconnected (WP 0294 00)

Instrument panel removed (WP 0238 00)

REMOVAL

NOTE

There are three gauges on the instrument panel. Except for the number of leads, remove all

gauges the same way.

Do not disconnect more than one gauge at a time. Mark each lead to make sure you reconnect

to correct contacts. See wiring diagrams at the end of this manual.

1.

Disconnect circuit leads (1) from rear of gauge (2).

2.

Remove two nuts (3), lockwashers (4), and bracket (5) from rear of gauge (2). Discard lockwashers.

3.

Remove gauge (2) from front of instrument panel.

024400-1