TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 525 of 1008

TM 9-2350-261-20-2

REPAIR WIRING HARNESS — Continued

0312 00

b.

If insulated sleeving (12) was removed from lead (13), slide new insulated sleeving on lead. Strip insulation from

lead to same length as crimp (14) on terminal (15).

c.

If large diameter lead (1), fill crimp (2) on terminal (3) with solder. Use soldering gun. Insert lead into melted

solder in crimp. Allow to cool.

d.

If lead (11) is small diameter, position terminal (13) on lead. Crimp terminal on lead.

e.

Heat shrink insulated sleeving (1) on terminal (2) and leads.

4 .

In stall m ultiple co nnect

ors th e sam e way as single co nnectors. See

ASSEMBLY

Steps 1 - 2.

031200-5