TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 527 of 1008

TM 9-2350-261-20-2

REPAIR RECEPTACLE

0313 00

THIS WORK PACKAGE COVERS:

Disassembly

( page 03 13 00 -1 ).

Clean, Inspect, and Repair (page 0313 00-2).

Assembly

( p ag e 0 313 0 0 -2 ).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

Digital Multimeter (WP 0780 00, Item 43)

Electrical Tool Kit (WP 0780 00, Item 80)

General Mechanic’s Tool Kit (WP 0780 00, Item 29)

Soldering Gun (WP 0780 00, Item 33)

Materials/Parts

Insulation sleeving (WP 0782 00, Item 30)

Insulation sleeving (WP 0782 00, Item 31)

Insulation sleeving (WP 0782 00, Item 32)

Insulation sleeving (WP 0782 00, Item 33)

Insulation sleeving (WP 0782 00, Item 34)

Solder (WP 0782 00, Item 71)

Personnel Required

Unit Mechanic

Equipment Condition

Engine stopped/shutdown (see your -10)

Battery ground lead disconnected (WP 0294 00)

Carrier blocked (see your -10)

DISASSEMBLY

NOTE

Use same procedure for repairing single or multiple lead, and male or female receptacle.

1.

Loosen nut (1) from receptacle (2). Slide nut back on leads (3).

2.

Remove grommet (4) with contacts (5) from rear of receptacle.

3.

Push leads (3) into grommet (4) until contacts (5) are fully exposed on other side of grommet. Remove grommet and

nut (1) from leads.

4.

Clip or desolder leads from contacts. Use soldering gun. Discard contacts.

031300-1