TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 552 of 1008

TM 9-2350-261-20-2

REPLACE POWER PLANT WIRING HARNESS — Continued

0321 00

FOLLOW-THROUGH STEPS

1.

Connect battery ground lead (WP 0294 00).

2.

Install power plant rear access panel (WP 0431 00, WP 0432 00, or WP 0433 00).

3.

Start engine (see your -10). Check that power plant wiring harness operates properly.

4.

Raise and lock ramp (see your -10).

5.

Stop/shutdown engine (see your -10).

6.

Close power plant front access door and raise trim vane (see your -10).

7.

Install power plant bottom access cover (WP 0434 00).

END OF TASK

0321 00-8