TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 555 of 1008

TM 9-2350-261-20-2

REPLACE FRONT BILGE PUMP AND STRAINER

0322 00

THIS WORK PACKAGE COVERS:

Removal (page 0322 00-1).

Installation (page 0322 00-2).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

Adjustable Wrench (WP 0780 00, Item 87)

General Mechanic’s Tool Kit (WP 0780 00, Item 29)

Pipe Wrench (WP 0780 00, Item 93)

Materials/Parts

Adhesive (WP 0782 00, Item 66)

Sealing compound (WP 0782 00, Item 60)

Cushion (3)

Key washer (3)

Lockwasher (5)

Lockwasher (2)

Personnel Required

Unit Mechanic

Equipment Condition

Engine stopped/shutdown (see your -10)

Carrier blocked (see your -10)

Trim vane lowered (see your -10)

Hull front access cover removed (WP 0429 00)

Battery ground lead disconnected (WP 0294 00)

REMOVAL

NOTE

If only strainer is to be replaced, do REMOVAL Steps 1 - 2 and INSTALLATION Steps 9 - 10.

1.

Disconnect lead (1) from bilge pump (2).

2.

Remove two screws (3), lockwashers (4), and strainer (5) from hull weldnuts. Discard lockwashers.

032200-1