TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 564 of 1008

TM 9-2350-261-20-2

REPLACE FRONT BILGE VALVE — Continued

0324 00

INSTALLATION

1.

Install valve (5) on hull cross beam (4).

2.

Secure with three screws (3), six washers (2), and three new locknuts (1).

FOLLOW-THROUGH STEPS

1.

Check for freedom of movement of valve after installation.

2.

Install left front floor plate (WP 0437 00, WP 0438 00, and WP 0441 00).

3.

Install personnel heater floor duct (WP 0617 00).

4.

Install driver’s rear floor plate (WP 0439 00).

5.

Raise and lock ramp (see your -10).

6.

Stop/shutdown engine (see your -10).

END OF TASK

0324 00-2