TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 566 of 1008

TM 9-2350-261-20-2

REPLACE REAR BILGE PUMP AND STRAINER — Continued

0325 00

2.

On M1064 only, remove screw (3), washer (4), and strainer (5) from pump (2).

3.

Remove two screws (6), key washers (7), and bracket (8) from hull weldnuts. Discard key washers.

4.

Remove two screws (9), three lockwashers (10), key washer (11), ground lead (12), and bracket (13) from hull weldnuts.

Discard lockwashers and key washer.

5.

Loosen clamp (14). Remove pump (2) from hose (15) and cushion (16).

6.

Remove strainer (17) (M1064) or strainer (18) (all other carriers) from hull weldnuts.

7.

Remove screw (19), two lockwashers (20), ground lead (12), and adapter (21) from pump (2). Use adjustable wrench.

Discard lockwashers.

8.

M1064 only, remove screw (22), locknut (24), and bracket (23) from pump (2). Discard locknut.

0325 00-2