TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 572 of 1008

TM 9-2350-261-20-2

REPLACE REAR BILGE PUMP PIPES — Continued

0326 00

INSTALLATION

1.

Install two clamps (3), hoses (5), and four clamps (4) on pipe (6).

2.

Install pipe (6) in carrier and slide hoses (5) onto discharge tube (7) and bilge pump (8). Secure with four clamps (4).

3.

Align two clamps (3) with bulkhead weldnuts. Secure with two new lockwashers (2) and screws (1).

FOLLOW-THROUGH STEPS

1.

Install smoke generator fog oil tank module (M1059 Only) (WP 0695 00).

2.

Turn MASTER SWITCH to ON (see your-10).

3.

Turn rear B ILGE PU M P SWITCH O N (see your-10). Check pipe for l eaks.

4.

Turn BILGE PUMP SWITCH OFF (see your-10).

5.

Turn MASTER SWITCH to OFF (see your-10).

6.

Install rear floor plate (WP 0436 00).

END OF TASK

0326 00-2