TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 571 of 1008

TM 9-2350-261-20-2

REPLACE REAR BILGE PUMP PIPES

0326 00

THIS WORK PACKAGE COVERS:

Removal (page 0326 00-1).

Installation (page 0326 00-2).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0780 00, Item 29)

Materials/Parts

Lockwasher (2)

Personnel Required

Unit Mechanic

Equipment Condition

Engine stopped/shutdown (see your -10)

Ramp lowered (see your -10)

Rear floor plate removed (WP 0436 00)

Remove smoke generator fog oil tank module (M1059

Only) (WP 0695 00)

REMOVAL

1.

Remove two screws (1), lockwashers (2), and clamps (3) from two bulkhead weldnuts. Discard lockwashers.

2.

Loosen four clamps (4) and slide two hoses (5) back on pipe (6). Remove pipe from carrier.

3.

Remove four clamps (4), two hoses (5), and two clamps (3) from pipe(6).

032600-1