TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 573 of 1008

TM 9-2350-261-20-2

REPLACE BILGE PUMP CIRCUIT BREAKERS

0327 00

THIS WORK PACKAGE COVERS:

Removal (page 0327 00-1).

Installation (page 0327 00-2).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0780 00, Item 29)

Materials/Parts

Gasket

Locknut (8)

Locknut (4)

Personnel Required

Unit Mechanic

Equipment Condition

Engine stopped/shutdown (see your -10)

Carrier blocked (see your -10)

Battery ground lead disconnected (WP 0294 00)

REMOVAL

1.

Remove eight screws (1), washers (2), and locknuts (3) from master switch panel (4) and distribution box (5). Remove

master switch panel from distribution box. Discard locknuts.

2.

Disconnect circuit 450 lead (6) and circuit 450A lead (7) from front bilge pump circuit breaker (8).

3.

Disconnect circuit 450B lead (9) and circuit 450C lead (10) from rear bilge pump circuit breaker (11).

4.

Remove four locknuts (12), screws (13), and two circuit breakers (8) and (11) from distribution box (5). Discard

locknuts.

032700-1