TM 9-2350-261-20-2
REPLACE UTILITY OUTLET RECEPTACLE (ALL EXCEPT M577A2
AND M1068) — Continued
0329 00
4.
Install master switch panel (2) on distribution box (9). Secure with eight screws (10), washers (11), and new locknuts
(12).
5.
Connect circuit 37 lead (13) to utility receptacle lead (14).
FOLLOW-THROUGH STEPS
1.
Install warning light panel assembly (WP 0253 00).
2.
Connect battery ground lead (WP 0294 00).
3.
Turn MASTER SWITCH to ON (see your -10) to check that receptacle is installed properly. Use multimeter.
4.
Turn MASTER SWITCH to OFF (see your -10).
END OF TASK
0329 00-4