TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 891 of 1008

TM 9-2350-261-20-2

REPLACE PIVOT STEER HANDLES AND LINKS — Continued

0410 00

INSTALLATION

1.

Install four nuts (1) on rod end bearings (2).

2.

Install four rod end bearings (2) in two links (3). Do not tighten nuts.

3.

Install two links (3) on bellcranks (4). Secure with four screws (5) and new locknuts (6).

4.

Place two handles (7) in four mounts (8). Secure with two shafts (9) and four new cotter pins (10).

5.

Install two links (3) on handles (7). Secure with two screws (5) and nuts (6).

6.

Attach two springs (11) to handles (7) and brackets (12).

7.

Adjust pivot steer linkage (WP 0415 00).

8.

Tighten four nuts (1) that secure rod end bearings (2) to two links (3).

041000-3