TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 895 of 1008

TM 9-2350-261-20-2

REPLACE PIVOT STEER BELLCRANKS AND BRACKETS — Continued

0411 00

INSTALLATION

1.

Install four rod ends (1) on ends of levers and shafts (2).

2.

Secure four rod ends (1) to mount (3) with eight new locknuts (4).

3.

Install mount (3) on two brackets (5). Secure with six screws (6), washers (7), and nuts (8).

4.

Install two links (9) to levers and shafts (2). Secure with two screws (10) and nuts (11).

5.

Install two master cylinders (12) on mount (3). Secure with six screws (13).

6.

Install two master cylinders (12) to levers and shafts (2). Secure with two clevis pins (14) and new cotter pins (15).

7.

Adjust pivot steer linkage (WP 0415 00).

041100-3