TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 901 of 1008

2.

Disconnect two hoses (4) from quick disconnect couplings (5).

3.

Remove two couplings (5) from two elbows (6).

4.

Remove six screws (7), washers (8), two clips (9), and two pivot steer brakes (3) from two pivot steer disks (10).

5.

Remove brake linings (11) from each pivot steer brake half (3).

6.

Remove two elbows (6), tubes (12), tees (13), tubes (14), elbows (15), and four packings (16) from two pivot steer

brakes (3). Discard packings.

7.

Remove two hoses (4) from tubes (17) and (18).

8.

Disconnect tubes (17) and (18) from elbows (19).

9.

Remove five screws (20), washers (21), clamps (22), and tubes (17) and (18) from five weldnuts (23).

10. Remove two nuts (24) and elbows (19) from bulkhead.

REPLACE/REPAIR PIVOT STEER BRAKES, HOSES, TUBES, AND

FITTINGS — Continued

0413 00

TM 9-2350-261-20-2

INSPECTION-ACCEPTANCE AND REJECTION CRITERIA

1.

Check all parts for cracks, wear, and damage. Replace if needed.

041300-3